Kdenlive   bug tracker Home page

View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0001513KdenliveUser Interfacepublic2010-03-16 05:072010-03-16 05:07
Reporterthatonefilmguy 
Assigned To 
PrioritynormalSeverityminorReproducibilityalways
StatusnewResolutionopen 
Platform64 bitOSUbuntu LinuxOS Version9.10
Product VersionRecent git 
Target VersionFixed in Version 
Summary0001513: Ability to set start timecode value for sequence.
DescriptionIt is not possible to set the start timecode value for the sequence. The sequence always starts at timecode 00:00:00:00.

The user should be able to set this value. This is commonly used in broadcast to, for example, run 30 to 60 seconds of color bars and tone, and/or black before the timecode rolls over to the next hour value. The start timecode of the sequence is normally set to accommodate this 30 seconds so that the actual programming starts at the hour mark.

For example, an editor might:
1. Set the start timecode at 23:59:00:00 (for 29.97 NTSC video, the timecode should roll over after 23:59:59:29 to 00:00:00:00).
2. Then they put 50 seconds of color bars and tone, a 7 second countdown, and three seconds of black. (or similar - it depends on who and what the production is for)
3. This gives them 1 minute of pre-roll, and the program will start at exactly the 00:00:00:00 timecode mark.
Steps To ReproduceThis feature has not been implemented in kdenlive.
TagsNo tags attached.
Build/Install MethodManual build from SVN
Attached Files

- Relationships

-  Notes
There are no notes attached to this issue.

- Issue History
Date Modified Username Field Change
2010-03-16 05:07 thatonefilmguy New Issue


Copyright © 2000 - 2014 MantisBT Team
Powered by Mantis Bugtracker